广东彩涂板厂家屋面墙面雨棚彩钢板厂房价格定制PVDF氟碳彩钢板 ...

PVDF氟碳彩钢板涂层和金属的完美结合使材质的功能和形态发挥到了极致，是城市建设重点工程、公共及民用建筑、体育场馆、建筑金属幕墙、电厂、化工企业等重点工程彩板的较佳选择。

The perfect combination of PVDF fluorocarbon color steel plate coating and metal makes the function and form of the material come to full play. It is a better choice for key projects of urban construction, public and civil buildings, stadiums, building metal curtain walls, power plants, chemical enterprises and other key projects.

薄钢板经冷压或冷轧成型的钢材。钢板采用有机涂层薄钢板（或称彩色钢板）、镀锌薄钢板、防腐薄钢板(含石棉沥青层)或其他薄钢板等。压型板具有单位重量轻、强度高、抗震性能好、施工快速、外形美观等优点,是良好的建筑材料和构件,主要用于围护结构、楼板，也可用于其他构筑物。根据不同使用功能要求，压型板可压成波形、双曲波形、肋形、 V形、加劲型等。

Thin steel plate formed by cold pressed or cold rolled steel. The steel plate adopts organic coating thin steel plate (or color steel plate), galvanized thin steel sheet, anti-corrosion thin steel plate (including asbestos asphalt layer) or other thin steel sheet, etc. Press plate has the advantages of light unit weight, high strength, good seismic performance, fast construction, beautiful appearance and so on. It is a good building material and components, mainly used for envelope structure, floor, can also be used for other structures. According to different functional requirements, the pressing plate can be pressed into waveform, hyperbolic waveform, rib, V, stiffening, etc.

屋面和墙面常用板厚为0.4～1.6毫米；用于承重楼板或筒仓时厚度达 2～3毫米或以上。波高一般为10～200毫米不等。当不加劲时,其高厚比宜控制在200以内。当采用通长屋面板,其坡度可采用2～5%，则挠度不超过l/300(l为计算跨长)

The thickness of roof and wall is 0.4~1.6 mm; 2~3 mm or above for load-bearing floor or silos. The wave height generally ranges from 10 to 200 mm. When not strenuous, its high thickness ratio should be controlled within 200. When the long roof panel is used, the slope can be 2~5%, then the deflection shall not exceed l / 300 (l is the calculated span length)

压型板因原板很薄，防腐涂料的质量直接影响使用寿命，为了适应加工和防锈要求，涂层钢板需按有关规定进行各项检验。一般情况下薄钢板也可根据使用要求，经压型后再涂防锈油漆，或采用不锈钢薄板原板。

Because the original plate is very thin, the quality of the anticorrosive coating directly affects the service life. In order to meet the requirements of processing and rust prevention, the coated steel plate should be inspected according to the relevant regulations. Under normal circumstances, sheet steel can also be used according to the requirements, after applying anti-rust paint, or using stainless steel sheet original plate.

压型板用作工业厂房屋面板、墙板时，在一般无保温要求的情况下,每平方米用钢量约5～11公斤。有保温要求时，可用矿棉板、玻璃棉、泡沫塑料等作绝热材料。压型板与混凝土结合做成组合楼板，可省去木模板并可作为承重结构。同时为加强压型板与混凝土的结合力，宜在钢板上预焊栓钉或压制双向加劲肋。

When the pressing plate is used as the industrial workshop house panel and wall board, in the case of no insulation requirements, the steel volume per square meter is about 5~11 kg. When there are insulation requirements, mineral wool board, glass wool, foam plastic can be used as insulation materials. The pressing plate is combined with concrete to make a composite floor, which can save wood formwork and be used as a load-bearing structure. At the same time, in order to strengthen the combination of pressing plate and concrete, it is appropriate to pre-weld bolt nail or press two-way reinforcing rib on the steel plate.