佛山彩涂板厂家彩色钢板镀铝锌彩涂钢板镀锌彩涂钢板涂层厚度 ...

彩色钢板的强度依赖于底材，因此其强度可以参考基板的情况，也有企业按照CQ、DQ、HSS、FH来分，但最终如何选择取决于设计的要求，特别是对应的屈服强度、抗拉强度、延伸率等指标。和大部分钢材一样，涂镀钢板也在向高强度方向发展。

The strength of color steel plate depends on the substrate, so its strength can be referred to the situation of the substrate, there are also enterprises according to CQ, DQ, HSS, FH, but the final choice depends on the requirements of the design, especially the corresponding yield strength, tensile strength, elongation rate and other indicators. Like most steel, coated steel is moving towards high strength.

由于锌和铝在酸性和碱性环境中的不同表现，在酸性环境中推荐采用镀铝锌基板彩涂钢板，对以镀（铝）锌板为基板的彩色钢板来讲，镀层厚度主要影响彩色钢板的切口腐蚀性能。基板越薄，锌层越厚，切口耐腐蚀性能越好；在碱性环境中推荐采用镀锌基板彩涂钢板。彩色钢板涂层能起到一定的防腐作用，它利用涂膜隔绝外界的腐蚀物质，但是由于涂膜本身从微观来看还是有孔的，空气中的水汽还是会少量侵入涂层，造成涂层起泡并有可能引起涂膜脱落。对于钢板来讲镀层（镀锌或者镀铝锌）对于钢板的寿命影响更大。

Due to the different performance of zinc and aluminum in acidic and alkaline environment, it is recommended to use aluminized zinc substrate color plate in acidic environment. For the color steel plate with plating (aluminum) zinc plate as the substrate, the coating thickness mainly affects the incision corrosion performance of the color steel plate. The thinner the substrate, the thicker the zinc layer, the better the incision corrosion resistance; galvanized substrate color coated steel plate is recommended in alkaline environment. Color steel plate coating can play a certain anti-corrosion role, it uses the coating to isolate the corrosive substances of the outside world, but because the coating film itself from the micro point of view, the water vapor in the air will still invade the coating in a small amount, resulting in coating foaming and may cause the coating to fall off. For steel plate, coating (galvanized or galvanized) has a greater impact on the life of steel plate.

彩涂板的质量主要取决于彩涂板生产厂家，如果加工及安装设备和方法不当，也会在不同程度上引起最终产品的外观和使用寿命的损伤。小编为您诚意推荐广东彩涂板厂家——佛山万庆物资有限公司，坚定不移走高端涂镀钢材路线，抓住每一次发展新机遇，充分发挥彩涂生产线等产线优势，深度对接国内外外高端市场和客户需求，在彩涂产品方面推进家电和高端装饰用钢全覆盖。

The quality of color coating board mainly depends on the manufacturer of color coating board. If the processing and installation equipment and methods are improper, it will also cause the damage to the appearance and service life of the final product to varying degrees. Small make up for your sincerity recommend Guangdong color coated board manufacturers —— Foshan Wan Qing materials co., LTD., unswervingly take high-end coated steel route, seize every new development opportunities, give full play to the color coating production line advantage, depth docking market and customer demand at home and abroad, in terms of color coated products to promote home appliances and complete coverage of high-end decorative steel.